大概是因为论坛一个毕业去阿里的师兄就这么扫到了一个某品牌摄像头web管理界面。接着，对于我，YD的几周便开始了。各种扫描内网啊，No zuo no die啊= =，然后找到了一大堆开放到内网的摄像头、弱口令ssh、匿名ftp、嵌入式板甚至还有ip电话……独留我风中凌乱。
我准备把常见的东西都研究一圈= =
总之，用到了几种扫描器和自己写的扫描器……
nmap是一个专业的网络探索和安全审计开源工具。尽管它可以针对主机，却被设计来快速扫描大规模网络。nmap使用IP报文来决定网络上的主机是否可达，主机上哪些服务开放(应用程序名和版本)，它们运行着什么样的操作系统，包过滤器和防火墙的情况和许多其它特征。尽管nmap广泛用于安全审计。许多系统和网络管理员在实行日常工作比如网络发现、管理服务升级安排，监控主机或服务启动时间 时都很好用。
nmap的输出是一列被扫描的目标，和有关参数指定的补充信息。常见的比如说端口信息表：
~ ⮀ sudo nmap 10.210.96.193
Starting Nmap 6.25 ( http://nmap.org ) at 2014-04-18 21:44 CST
Nmap scan report for 10.210.96.193
Host is up (0.054s latency).
Not shown: 996 closed ports
PORT STATE SERVICE
21/tcp ssh closed
23/tcp open telnet
50389/tcp filtered unknown
MAC Address: 3C:E5:A6:D2:39:AD (Hangzhou H3C Technologies Co.)
open意味着服务在启动并监听着。比如TCP的三次握手成功建立。closed表示该端口上服务关闭。比如收到了目标主机返回的RST.filtered意味着有防火墙，过滤器等其它障碍阻塞了端口，以致于nmap不知道端口是open还是closed。出现这种情况是发出去的探测包没了响应。如果nmap不能确定到底是哪个状态，这些状态可以写成折中形式closed|filtered,表示关闭或者是过滤。
当使用版本探测参数(-sV)时，端口信息表也可以包含具体的服务版本信息。
~ ⮀ sudo nmap -sV 10.210.96.193
Starting Nmap 6.25 ( http://nmap.org ) at 2014-04-18 22:03 CST
Nmap scan report for 10.210.96.193
Host is up (0.045s latency).
Not shown: 996 closed ports
PORT STATE SERVICE VERSION
23/tcp open telnet H3C switch telnetd
MAC Address: 3C:E5:A6:D2:39:AD (Hangzhou H3C Technologies Co.)
Service Info: Device: switch
Service detection performed. Please report any incorrect results at http://nmap.org/submit/ .
Nmap done: 1 IP address (1 host up) scanned in 2.88 seconds
当使用IP协议扫描(-sO)时，nmap则提供IP支持的协议而不是端口：
~ ⮀ sudo nmap -sO 10.210.96.193
Starting Nmap 6.25 ( http://nmap.org ) at 2014-04-18 22:02 CST
Nmap scan report for 10.210.96.193
Host is up (0.010s latency).
Not shown: 252 open|filtered protocols
PROTOCOL STATE SERVICE
1 open icmp
6 open tcp
17 open udp
132 closed sctp
MAC Address: 3C:E5:A6:D2:39:AD (Hangzhou H3C Technologies Co.)
除了端口信息表，nmap提供目标的更多信息，包括反向DNS域名，操作系统猜测，设备类型和MAC地址。
更多参照Nmap Guide
~ ⮀ nmap --help
Nmap 6.25 ( http://nmap.org )
Usage: nmap [Scan Type(s)] [Options] {target specification}
TARGET SPECIFICATION:
Can pass hostnames, IP addresses, networks, etc.
Ex: scanme.nmap.org, microsoft.com/24, 192.168.0.1; 10.0.0-255.1-254
-iL : Input from list of hosts/networks
-iR : Choose random targets
--exclude : Exclude hosts/networks
--excludefile : Exclude list from file
HOST DISCOVERY:
-sL: List Scan - simply list targets to scan
-sn: Ping Scan - disable port scan
-Pn: Treat all hosts as online -- skip host discovery
-PS/PA/PU/PY[portlist]: TCP SYN/ACK, UDP or SCTP discovery to given ports
-PE/PP/PM: ICMP echo, timestamp, and netmask request discovery probes
-PO[protocol list]: IP Protocol Ping
-n/-R: Never do DNS resolution/Always resolve [default: sometimes]
--dns-servers : Specify custom DNS servers
--system-dns: Use OS's DNS resolver
--traceroute: Trace hop path to each host
SCAN TECHNIQUES:
-sS/sT/sA/sW/sM: TCP SYN/Connect()/ACK/Window/Maimon scans
-sU: UDP Scan
-sN/sF/sX: TCP Null, FIN, and Xmas scans
--scanflags : Customize TCP scan flags
-sI : Idle scan
-sY/sZ: SCTP INIT/COOKIE-ECHO scans
-sO: IP protocol scan
-b : FTP bounce scan
PORT SPECIFICATION AND SCAN ORDER:
-p : Only scan specified ports
Ex: -p22; -p1-65535; -p U:53,111,137,T:21-25,80,139,8080,S:9
-F: Fast mode - Scan fewer ports than the default scan
-r: Scan ports consecutively - don't randomize
--top-ports : Scan most common ports
--port-ratio : Scan ports more common than
SERVICE/VERSION DETECTION:
-sV: Probe open ports to determine service/version info
--version-intensity : Set from 0 (light) to 9 (try all probes)
--version-light: Limit to most likely probes (intensity 2)
--version-all: Try every single probe (intensity 9)
--version-trace: Show detailed version scan activity (for debugging)
SCRIPT SCAN:
-sC: equivalent to --script=default
--script=: is a comma separated list of
directories, script-files or script-categories
--script-args=: provide arguments to scripts
--script-args-file=filename: provide NSE script args in a file
--script-trace: Show all data sent and received
--script-updatedb: Update the script database.
--script-help= : Show help about scripts.
is a comma separted list of script-files or
script-categories.
OS DETECTION:
-O: Enable OS detection
--osscan-limit: Limit OS detection to promising targets
--osscan-guess: Guess OS more aggressively
TIMING AND PERFORMANCE:
Options which take : Send packets no slower than per second
--max-rate : Send packets no faster than per second
FIREWALL/IDS EVASION AND SPOOFING:
-f; --mtu : fragment packets (optionally w/given MTU)
-D : Cloak a scan with decoys
-S : Spoof source address
-e : Use specified interface
-g/--source-port : Use given port number
--data-length : Append random data to sent packets
--ip-options : Send packets with specified ip options
--ttl : Set IP time-to-live field
--spoof-mac : Spoof your MAC address
--badsum: Send packets with a bogus TCP/UDP/SCTP checksum
OUTPUT:
-oN/-oX/-oS/-oG : Output scan in normal, XML, s|: Output in the three major formats at once
-v: Increase verbosity level (use -vv or more for greater effect)
-d: Increase debugging level (use -dd or more for greater effect)
--reason: Display the reason a port is in a particular state
--open: Only show open (or possibly open) ports
--packet-trace: Show all packets sent and received
--iflist: Print host interfaces and routes (for debugging)
--log-errors: Log errors/warnings to the normal-format output file
--append-output: Append to rather than clobber specified output files
--resume : Resume an aborted scan
--stylesheet URL>: XSL stylesheet to transform XML output to HTML
--webxml: Reference stylesheet from Nmap.Org for more portable XML
--no-stylesheet: Prevent associating of XSL stylesheet w XML output
MISC:
-6: Enable IPv6 scanning
-A: Enable OS detection, version detection, script scanning, and traceroute
--datadir : Specify custom Nmap data file location
--send-eth/--send-ip: Send using raw ethernet frames or IP packets
--privileged: Assume that the user is fully privileged
--unprivileged: Assume the user lacks raw socket privileges
-V: Print version number
-h: Print this help summary page.
EXAMPLES:
nmap -v -A scanme.nmap.org
nmap -v -sn 192.168.0.0/16 10.0.0.0/8
nmap -v -iR 10000 -Pn -p 80
SEE THE MAN PAGE (http://nmap.org/book/man.html) FOR MORE OPTIONS AND EXAMPLES
Zmap是一个开源网络扫描器，旨在帮助研究人员轻松扫描互联网。通过单个机器和可观的上行量，zmap可以在45分钟内扫描整个IPv4地址段，达到以太网的理论上限。
zmap可以研究随时间变化协议的采用情况。检测互联网上可用的服务，让我们更好的理解分布在互联网上的大系统。
详细用法见：Zmap Documentation
Zmap是强有力的工具，但请尊重他人和当地法律。
号称最快的互联网端口扫描器，它能够在6分钟内扫遍整个互联网，每秒发送十个百万数据包。
它生成类似nmap的结果，但内部机理是类似scanrand、unicornscan和zmap异步传输。主要的区别是比它们都快(笑)。另外，它更灵活，允许任意的地址段和端口段。
自由软件。
~/ ⮀ masscan --help
MASSCAN is a fast port scanner. The primary input parameters are the
IP addresses/ranges you want to scan, and the port numbers. An example
is the following, which scans the 10.x.x.x network for web servers:
masscan 10.0.0.0/8 -p80
The program auto-detects network interface/adapter settings. If this
fails, you'll have to set these manually. The following is an
example of all the parameters that are needed:
--adapter-ip 192.168.10.123
--adapter-mac 00-11-22-33-44-55
--router-mac 66-55-44-33-22-11
Parameters can be set either via the command-line or config-file. The
names are the same for both. Thus, the above adapter settings would
appear as follows in a configuration file:
adapter-ip = 192.168.10.123
adapter-mac = 00-11-22-33-44-55
router-mac = 66-55-44-33-22-11
All single-dash parameters have a spelled out double-dash equivalent,
so '-p80' is the same as '--ports 80' (or 'ports = 80' in config file).
To use the config file, type:
masscan -c
To generate a config-file from the current settings, use the --echo
option. This stops the program from actually running, and just echoes
the current configuration instead. This is a useful way to generate
your first config file, or see a list of parameters you didn't know
about. I suggest you try it now:
masscan -p1234 --echo
Masscan github页面 Masscan: the entire Internet in 3 minutes
没啥好说的，拿这gevent写啊……暂时不开源。通常我先用zmap扫端口，然后送给自己的扫描器去扫。