LLVM 17 will be released. As usual, I maintain lld/ELF and have addedsome notes to https://github.com/llvm/llvm-project/blob/release/17.x/lld/docs/ReleaseNotes.rst.Here I will elaborate on some changes.

• When --threads= is not specified, the number ofconcurrency is now capped to 16. A large --thread= can harmperformance, especially with some system malloc implementations likeglibc's. (D147493)
• --remap-inputs= and --remap-inputs-file=are added to remap input files. (D148859)
• --lto= is now available to supportclang -funified-lto (D123805)
• --lto-CGO[0-3] is now available to controlCodeGenOpt::Level independent of the LTO optimizationlevel. (D141970)
• --check-dynamic-relocations= is now correct 32-bittargets when the addend is larger than 0x80000000. (D149347)
• --print-memory-usage has been implemented for memoryregions. (D150644)
• SHF_MERGE, --icf=, and--build-id=fast have switched to 64-bit xxh3. (D154813)
• Quoted output section names can now be used in linker scripts.(#60496 <https://github.com/llvm/llvm-project/issues/60496>_)
• MEMORY can now be used without a SECTIONScommand. (D145132)
• REVERSE can now be used in input section descriptionsto reverse the order of input sections. (D145381)
• Program header assignment can now be used withinOVERLAY. This functionality was accidentally lost in 2020.(D150445)
• Operators ^ and ^= can now be used inlinker scripts.
• LoongArch is now supported.
• DT_AARCH64_MEMTAG_* dynamic tags are now supported. (D143769)
• AArch32 port now supports BE-8 and BE-32 modes for big-endian. (D140201) (D140202) (D150870)
• R_ARM_THM_ALU_ABS_G* relocations are now supported. (D153407)
• .ARM.exidx sections may start at non-zero outputsection offset. (D148033)
• Arm Cortex-M Security Extensions is now implemented. (D139092)
• BTI landing pads are now added to PLT entries accessed by rangeextension thunks or relative vtables. (D148704) (D153264)
• AArch64 short range thunk has been implemented to mitigate theperformance loss of a long range thunk. (D148701)
• R_AVR_8_LO8/R_AVR_8_HI8/R_AVR_8_HLO8/R_AVR_LO8_LDI_GS/R_AVR_HI8_LDI_GShave been implemented. (D147100) (D147364)
• --no-power10-stubs now works for PowerPC64.
• DT_PPC64_OPT is now supported. (D150631)
• PT_RISCV_ATTRIBUTES is added to include theSHT_RISCV_ATTRIBUTES section. (D152065)
• R_RISCV_PLT32 is added to support C++ relative vtables.(D143115)
• RISC-V global pointer relaxation has been implemented. Specify--relax-gp to enable the linker relaxation. (D143673)
• The symbol value of foo is correctly handled when--wrap=foo and RISC-V linker relaxation are used. (D151768)
• x86-64 large data sections are now placed away from code sections toalleviate relocation overflow pressure. (D150510)

When using glibc malloc with a largerstd::thread::hardware_concurrency (say, more than 16),parallel relocation scanning can be quite slower without the--threads=16 throttling.

I usually try to make extensions, unless too LLVM internal specific(e.g. --lto-*), accepted by the binutils community. The feature request for--remap-inputs= and --remap-inputs-file= was asuccess story, implemented by GNU ld 2.41.

PT_RISCV_ATTRIBUTES output is still not quite right. Ialso question about its usefulness. Unfortunately, at this stage, it'sdifficult to getrid of it.

This cycle has a surprising number of new features, and I have spentlots of spare time reviewing them to ensure that they are robust andproperly tested. Most stuff is completely unrelated to my day job.

There are quite a few AArch32 changes from Arm engineers, primarilyabout big-endian support and Cortex-M Security Extensions.

I was firm that the RISC-V global pointer relaxation needs to beopt-in. I had a GNU ld --relax-gp patch last year andutilitized this opportunity (ld.lld feature proposal) to move forwardGNU ld --relax-gp. It's unfortunately opt-out, but havingan option is a step forward.

This release adds support for LoongArch, which is a relatively newarchitecture that took inspiration from Mips and RISC-V.

Speed

Unlike previous versions, there is just a minor performanceimprovement compared with lld 15.0.0. I added a simplified version of64-bit xxh3 into the LLVMSupport library and utilized it inlld.

Linking a -DCMAKE_BUILD_TYPE=Debug build of clang 16:

1
2
3
4
5
6
7
8
9
10
11
12

% hyperfine --warmup 2 --min-runs 25 "numactl -C 20-27 "{/tmp/out/custom-16/bin/ld.lld,/tmp/out/custom-17/bin/ld.lld}" @response.txt --threads=8"
Benchmark 1: numactl -C 20-27 /tmp/out/custom-16/bin/ld.lld @response.txt --threads=8
  Time (mean ± σ):      3.159 s ±  0.035 s    [User: 7.089 s, System: 3.076 s]
  Range (min … max):    3.095 s …  3.250 s    25 runs

Benchmark 2: numactl -C 20-27 /tmp/out/custom-17/bin/ld.lld @response.txt --threads=8
  Time (mean ± σ):      3.131 s ±  0.027 s    [User: 6.851 s, System: 3.101 s]
  Range (min … max):    3.080 s …  3.198 s    25 runs

Summary
  'numactl -C 20-27 /tmp/out/custom-17/bin/ld.lld @response.txt --threads=8' ran
    1.01 ± 0.01 times faster than 'numactl -C 20-27 /tmp/out/custom-16/bin/ld.lld @response.txt --threads=8'

This influence to the total link time is small. However, if I testthe time proportion of the hash function in the total link time, I cansee that the proportion has been reduced to nearly one third. On someworkload and some machines this effect may be larger.